Aesteiron Steels LLP
Girgaon, Mumbai, Maharashtra
Send SMS
Send E-mail
| Size | As Per Requirement |
| Certification | ISO |
| Thickness | 0-1 mm, 4-5 mm, >5 mm |
| I Deal In | New Only |
| Standards | ASTM |
| Grade | AH36 |
| Element | % |
| C | 0.18 |
| Si | 0.10/0.50 |
| Mn (min) | 0.90/1.60 |
| P | 0.035 |
| S | 0.035 |
| Cr | 0.2 |
| Mo | 0.08 |
| Ni | 0.4 |
| Cu | 0.35 |
| Cb | 0.02/0.05 |
| V | 0.05/0.10 |
| Grade | Re | Rm | Elongation | |
| A50mm | A200mm | |||
| MPa | MPa | % | % | |
| AH36 | 355 | 490/620 | 22 | 19 |
| Type | Fittings |
| Size | As Per Reuirement |
| Condition | New |
| Steel Grade | UNS R05200,UNS R05400 |
| Origin | Indian |
| Material | Stainless Steel,Alloy Steel,Carbon Steel,Monel,Hastelloy |
| Thickness | >5 mm, 1-2 mm, 0-1 mm, 2-3 mm, 4-5 mm, 3-4 mm |
| Grade | A238 |
| Material | SS |
| Standards | ASTM |
| Finishing | Bright, Polish & Black |
| Element | % |
| C | 0.14 |
| Si | 0.15-0.40 |
| Mn | 0.9 |
| P | 0.035 |
| S | 0.04 |
| Cu (min) | 0.2 |
*Your information is safe with us.
| Steel Grade | SS 302B |
| Thickness | 0-1 mm, 4-5 mm, >5 mm, 2-3 mm, 1-2 mm, 3-4 mm |
| Standard | ASTM |
| Surface Treatment | Coated, Hot Rolled, Painted |
| Certification | SGS, ROHS |
| C | 0.15 |
| Si | 2.00/3.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.03 |
| Cr | 17.0/19.0 |
| Mo | - |
| Ni | 8.00/10.0 |
| Other | - |
| Thickness | As Per Requirement |
| Material | Molybdenum |
| Alloy | With Alloy |
| Product Type | Sheets |
| Condition | New |
| Steel Grade | SS 317LN |
| Thickness | 4-5 mm, >5 mm |
| Standard | ASTM |
| Surface Treatment | Painted, Coated |
| Finishing | Bright, Polish & Black |
We are:
ASTM A240 Grade 317LN Sheet Stockist
ASTM A240 Grade 317LN Sheet Supplier
ASTM A240 Grade 317LN Sheet Trader
ASTM A240 Grade 317LN Sheet Dealer
ASTM A240 Grade 317LN Sheet Manufacturer
ASTM A240 Grade 317LN Sheet Exporter
ASTM A240 Grade 317LN Plate Stockist
ASTM A240 Grade 317LN Plate Supplier
ASTM A240 Grade 317LN Plate Trader
ASTM A240 Grade 317LN Plate Dealer
ASTM A240 Grade 317LN Plate Manufacturer
ASTM A240 Grade 317LN Plate Exporter
Grades under ASTM A240 Sheet Plate:
ASTM A240 Grade 800 Sheet Plate
ASTM A240 Grade 800H Sheet Plate
ASTM A240 Grade 904L Sheet Plate
ASTM A240 Grade 201 Sheet Plate
ASTM A240 Grade 202 Sheet Plate
ASTM A240 Grade XM-19 Sheet Plate
ASTM A240 Grade XM-31 Sheet Plate
ASTM A240 Grade XM-17 Sheet Plate
ASTM A240 Grade XM-18 Sheet Plate
ASTM A240 Grade XM-29 Sheet Plate
ASTM A240 Grade 301 Sheet Plate
ASTM A240 Grade 301L Sheet Plate
ASTM A240 Grade 301LN Sheet Plate
ASTM A240 Grade 302 Sheet Plate
ASTM A240 Grade 304 Sheet Plate
ASTM A240 Grade 304L Sheet Plate
ASTM A240 Grade 304H Sheet Plate
ASTM A240 Grade 304N Sheet Plate
ASTM A240 Grade XM-21 Sheet Plate
ASTM A240 Grade 305 Sheet Plate
ASTM A240 Grade 309S Sheet Plate
ASTM A240 Grade 309H Sheet Plate
ASTM A240 Grade 309Cb Sheet Plate
ASTM A240 Grade 309HCb Sheet Plate
ASTM A240 Grade 310S Sheet Plate
ASTM A240 Grade 310H Sheet Plate
ASTM A240 Grade 310Cb Sheet Plate
ASTM A240 Grade 310HCb Sheet Plate
ASTM A240 Grade 310 MoLN Sheet Plate
ASTM A240 Grade 316 Sheet Plate
ASTM A240 Grade 316L Sheet Plate
ASTM A240 Grade 316H Sheet Plate
ASTM A240 Grade 316Ti Sheet Plate
ASTM A240 Grade 316Cb Sheet Plate
ASTM A240 Grade 316N Sheet Plate
ASTM A240 Grade 316LN Sheet Plate
ASTM A240 Grade 317 Sheet Plate
ASTM A240 Grade 317L Sheet Plate
ASTM A240 Grade 317LM Sheet Plate
ASTM A240 Grade 317LMN Sheet Plate
ASTM A240 Grade 317LN Sheet Plate
ASTM A240 Grade 321 Sheet Plate
ASTM A240 Grade 321H Sheet Plate
ASTM A240 Grade 334 Sheet Plate
ASTM A240 Grade 347 Sheet Plate
ASTM A240 Grade 347H Sheet Plate
ASTM A240 Grade 348 Sheet Plate
ASTM A240 Grade 348H Sheet Plate
ASTM A240 Grade XM-15 Sheet Plate
| Element | % |
| Carbon | 0.030 |
| Manganese | 2.00 |
| Phosphorus | 0.045 |
| Sulfur | 0.030 |
| Silicon | 0.75 |
| Chromium | 18.0-20.0 |
| Nickel | 11.0-15.0 |
| Molybdenum | 3.00-4.00 |
| Nitrogen | 0.10-0.22 |
*Your information is safe with us.
| Product Type | Plates |
| Material | Tantalum |
| Size | As Per Requirement |
| Condition | New |
| Type | Plate |
| Thickness | 3-4 mm , 1-2 mm, 2-3 mm |
| Steel Grade | SS304 L, SS409 L |
| Surface Treatment | Cold Rolled, Hot Rolled, Painted |
| Type | Plate |
| Element | % |
| Carbon | 0.15 |
| Manganese | 5.5-7.5 |
| Phosphorus | 0.060 |
| Sulfur | 0.030 |
| Silicon | 1.00 |
| Chromium | 16.0-18.0 |
| Nickel | 3.5-5.5 |
| Molybdenum | - |
| Nitrogen | 0.25 |
| Copper | - |
| Thickness | 1-2 mm, 2-3 mm, 3-4 mm |
| Steel Grade | SS316 L, SS304 L, SS409 L |
| Surface Treatment | Hot Rolled, Cold Rolled |
| Type | Plate |
*Your information is safe with us.
| Steel Grade | SS 303Se |
| Thickness | 1-2 mm, 2-3 mm, 4-5 mm, >5 mm, 0-1 mm, 3-4 mm |
Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers and exporters of SS 303Se Plates.
We are:
Stainless Steel 303Se Stockist
Stainless Steel 303Se Exporter
Stainless Steel 303Se Dealer
Stainless Steel 303Se Trader
Stainless Steel 303Se Manufacturer
Stainless Steel 303Se Supplier
Specifications
SS 303Se Plates
ASTM A240 Plates
ASME SA240 Plates
UNS S30323 Plates
SAE S30303Se Plates
AISI 303Se Plates
JIS SUS303Se Plates
ASTM A240 TP 303Se Plates
ASME SA240 303Se Plates
ASTM A240 Grade 303Se Plates
ASME SA240 Grade 303Se Plates
Description
SS 303Se is a free-machining stainless steel specifically designed to exhibit improved machinability. It is a non-magnetic austenitic stainless steel which is not hardenable by heat treatment. Selenium replaces sulfur to produce the free-machining characteristics and has somewhat improved formability over 303. The good mechanical and corrosion-resistant properties of the lower-sulfur grade are retained to the extent possible.
SS 303Se Plates Chemical Composition
| C | 0.15 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.20 |
| S | 0.06 |
| Cr | 17.0/19.0 |
| Mo | - |
| Ni | 8.00/10.0 |
| Other | Se 0.15 min |
SS 303Se Plates Application
Type 303Se should be considered for use in applications such as shafts, valve bodies, valves, valve trim, and fittings. This steel possesses non-galling properties that make disassembly of parts easy-and help to avoid scratching or galling in moving parts
Please contact us for more details.
| Thickness | 2-3 mm, >5 mm, 4-5 mm, 1-2 mm, 3-4 mm, 0-1 mm |
| Element | % |
| C | 0.12 - 0.20 |
| Si | 0.15 - 0.50 |
| Mn | 0.50 - 0.80 |
| P | ≤0.04 |
| S | ≤0.04 |
| Cr | - |
| Mo | 0.45 - 0.65 |
| Ni | - |
| Others | - |
| Size | As Per Requirement |
| Element | % |
| C | 0.28 |
| Mn | 0.85-1.2 |
| P | 0.035 |
| S | 0.04 |
| Si | 0.15-0.40 |
| Thickness(mm) | Min Yield (Mpa) | Tensile(MPa) | Elongation(%) |
| 6mm-40mm | 290Mpa | 485-620Mpa | 21% |
| 40mm-100mm | … | … | … |
*Your information is safe with us.
| Inconel Grades | 600, 601, 617, 625, 686, 690, 693, 706, 718, 725, 740, X-750, 751, 783, 800/H |
| Thickness | 2-3 mm, 3-4 mm, 4-5 mm, >5 mm, 0-1 mm, 1-2 mm |
| Steel Grade | SS 304 |
| C | 0.08 |
| Si | 0.75 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.03 |
| Cr | 18.0/20.0 |
| Mo | - |
| Ni | 8.00/10.5 |
| Other | - |
| Tensile Strength Mpa, (Min) | Yield Strength Mpa, (Min) | %Age Elongation in 50mm gauge length min | Hardness (Max) | |
| BHN | Rb | |||
| 515 | 205 | 40 | 201 | 92 |
| Thickness | 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm |
| Element | % |
| C | 0.60 |
| Si | 1.65 |
| Mn | 0.85 |
| Cr | - |
| Mo | - |
| Ni | - |
| V | - |
| W | - |
| Others | - |
*Your information is safe with us.
| Thickness | >5 mm, 3-4 mm, 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm |
| Element | % |
| C | 0.16 |
| Si | 0.5 |
| Mn | 0.9/1.60 |
| P | 0.025 |
| S | 0.025 |
| Al acid | ≥ 0.015 |
| Nb | 0.02/0.05 |
| V | 0.03/0.10 |
| Ti | 0.02 |
| Ni | 0.8 |
| Cu | 0.35 |
| Cr | 0.2 |
| Mo | 0.08 |
| N | 0.009 |
| Yield strength (Mpa) | Tensile strength (Mpa) | Impacting Test |
| temperature (℃) | ||
| ≥390 | 510-650 | -60 |
| Thickness | 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm |
| Element | % |
| C | 0.2 |
| Si | 0.13-0.45 |
| Mn | 0.70-0.80 |
| P | 0.035 |
| S | 0.035 |
| Tensile strength, kis [MPa] | 70-90 [485-620] |
| Yield strength, min, kis [MPa] | 40 [275] |
| Elongation in 8 in. [200 mm], min, % | 17 |
| Elongation in 2 in. [50 mm], min, % | 21 |
| Thickness | 3-4 mm, 4-5 mm, 2-3 mm, 1-2 mm, 0-1 mm, >5 mm |
| Element | % |
| C | 0.18 |
| Si | 0.6 |
| Mn | 1.65 |
| P | 0.025 |
| S | 0.035 |
| V | 0.08 |
| Ni | 0.020 |
| Co | 0.10 |
*Your information is safe with us.
| Thickness | >5 mm, 3-4 mm, 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm |
| Element | % |
| C | 0,17 |
| Si | 0.13-0.45 |
| Mn | 0.84-1.46 |
| P | 0,035 |
| S | 0,035 |
| Thickness mm | Yield Min Mpa | Tensile Mpa | Elongation Min % |
| 06-50 | 275 | 400-540 | 23% |
| 50-200 | 275 | 400-540 | 20% |
| Thickness | 0-1 mm, 1-2 mm, >5 mm, 3-4 mm, 4-5 mm, 2-3 mm |
| Elements | % |
| C | 0,22 |
| Si | 0.13-0.45 |
| Mn | 0.79-1.62 |
| P | 0,035 |
| S | 0,035 |
| Thickness mm | Yield Min Mpa | Tensile Mpa | Elongation Min % |
| 06-50 | 275 | 450-585 | 23% |
| 50-200 | 275 | 450-585 | 20% |
| Thickness | 4-5 mm, 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, >5 mm |
| Surface Treatment | Painted, Coated, Hot Rolled |
Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers and exporters of ASTM A662 Grade C Plate.
We are:
ASTM A662 Grade C Plate Stockist
ASTM A662 Grade C Plate Supplier
ASTM A662 Grade C Plate Trader
ASTM A662 Grade C Plate Dealer
ASTM A662 Grade C Plate Manufacturer
ASTM A662 Grade C Plate Exporter
ASTM A662 Grade C Standards:-
ASTM A662 Grade C Plate
ASME SA662 Grade C Plate
ASTM A662 GrC Plate
ASME SA662 GrC Plate
ASTM A662 Grade C Sheet
ASME SA662 Grade C Sheet
ASTM A662 GrC Sheet
ASME SA662 GrC Sheet
ASTM A662 Grade C Chemical Composition
Element | % |
C | 0.24 |
Mn | 0.92-1.72 |
P | 0.035 |
| 0,035 |
Si | 0.13-0.55 |
ASTM A662 Grade C Mechanical Properties
Thickness mm | Yield Min Mpa | Tensile Mpa | Elongation Min % | |
200 | 295 | 485-620 | 18 | |
50 | 22 |
Please contact us for more details.
*Your information is safe with us.
| Thickness | 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm |
| Element | % |
| C | 0.11 Max |
| Mn | 1.10 - 1.35 |
| P | 0.020 Max |
| S | 0.006 Max. |
| Si | 0.30 - 0.50 |
| Cu | 0.25 - 0.40 |
| Ni | 0.25 - 0.40 |
| Cr | 0.45 - 0.70 |
| Mo | 0.02 - 0.08 |
| V | 0.04 - 0.08 |
| Al | 0.01 - 0.04 |
| Ni | 0.015 Max |
| Yield strength (min) | 50 ksi (345 Mpa) |
| Tensile strength | 70 ksi (345 Mpa) |
| Elongation in 2" (50 mm)min | 21% |
| Thickness | 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm |
| Element | Content (%) |
| Fe | 98 |
| Mn | 0.70-0.90 |
| Ni | 0.40-0.70 |
| Cr | 0.40-0.60 |
| P | 0.035 |
| Si | 0.15-0.30 |
| Mo | 0.15-0.25 |
| C | 0.15-0.20 |
| S | 0.04 |
| Properties | Metric | Imperial |
| Density | 7.7 – 8.03 g/cm3 | 0.278 – 0.290 lb/in³ |
| Thickness | 0-1 mm, 1-2 mm, >5 mm, 3-4 mm, 4-5 mm, 2-3 mm |
| Element | % |
| C | 0.23 - 0.28 |
| Cr | 0.4 - 0.6 |
| Mn | 0.7 - 0.9 |
| Mo | 0.15 - 0.25 |
| Ni | 0.4 - 0.7 |
| P | 0.035 max |
| Si | 0.15 - 0.35 |
| S | 0.04 max |
*Your information is safe with us.
| Thickness | 1-2 mm, 2-3 mm, 0-1 mm, 3-4 mm, 4-5 mm, >5 mm |
| Surface Treatment | Hot Rolled, Painted, Coated |
| Element | % |
| Cr | 17- 19 |
| Mn | 7.50-10 |
| Ni | 04-06 |
| Si | ≤ 1 |
| N | ≤ 0.25 |
| C | ≤ 0.15 |
| P | ≤ 0.060 |
| S | ≤ 0.030 |
| Properties | Metric |
| Tensile strength | 515 MPa |
| Yield strength | 275 MPa |
| Elastic modulus | 207 GPa |
| Elongation at break | 40% |
| Steel Grade | SS 301 |
| Thickness | 2-3 mm, 3-4 mm, 4-5 mm, 0-1 mm, 1-2 mm, >5 mm |
| Surface Treatment | Painted, Hot Rolled, Coated |
| Cr | 0.18-0.16 |
| Ni | 0.6-0.8 |
| C | 0.15 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| N | 0.10 |
| Tensile Strength | Yield Strength 0.2% | Elongation -% in 50 mm (min.) |
| ksi (min.) | ksi (min.) | |
| 125 | 75 | 25 |
|
Properties
SS 301 (UNS S30100) is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications.
Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications.
| Thickness | 0-1 mm, 1-2 mm, >5 mm, 2-3 mm, 3-4 mm, 4-5 mm |
| Surface Treatment | Painted, Hot Rolled, Coated |
| Tensile Strength , psi | 85,000 |
| Yield Strength, psi | 45,000 |
| Elongation | 50% |
| Hardness | Rb 180 |
| C | 0.15 |
| Si | 1 |
| Mn | 2 |
| P | 0.2 |
| S | 0.15 min |
| Cr | 17.0/19.0 |
| Mo | 0.6 |
| Ni | 8.00/10.0 |
| Other | Zr 0.60 |
*Your information is safe with us.
| Thickness | 0-1 mm, 1-2 mm, 3-4 mm, 4-5 mm, 2-3 mm, >5 mm |
| Surface Treatment | Coated, Painted, Hot Rolled |
| Cr | 0.12 max |
| C | 17 - 19 |
| Mn | 2 max |
| Ni | 10-13 |
| P | 0.045 max |
| Si | 1 max |
| S | 0.03 max |
| Condition | UTS ksi (Mpa) | 0.2% YS ksi (Mpa) | Elongation % in 2 " (50.8mm) | Rockwell Hardness |
| Annealed | 85 (586) | 35 (241) | 55 | B70 |
| Any application requiring maximum formability such as spun or deep drawn eyelets, barrels, shells, cold headed rivets or screws will work well. |
| Thickness | 3-4 mm, 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm |
| Steel Grade | SS 308 |
Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers and exporters of S S 308 Plates.
We are:
SS 308 Plates Stockist
SS 308 Plates Exporter
SS 308 Plates Dealer
SS 308 Plates Trader
SS 308 Plates Manufacturer
SS 308 Plates Supplier
Specifications
SS 308 Plate
ASTM A240 Plate
ASME SA240 Plate
AISI 308 Plate
KS STS308 Plate
JIS SUS 308 Plate
SAE 30308 Plate
UNS S30800 Plate
WNR 1.4303 Plate
ASTM A240 TP 308 Plate
ASME SA240 308 Plate
ASTM A240 Grade 308 Plate
ASME SA240 Grade 308 Plate
SS 308 Mechanical Properties
| TS N/mm2 | 591 |
| EL% 40 | 40 |
SS 308 Chemical Composition
| C | 0.058 |
| Mn | 1.28 |
| Si | 0.62 |
| P | 0.028 |
| S | 0.01 |
| Ni | 9.43 |
| Cr | 19.7 |
Application
1).Petroleum,Chemical enterprise, superheater of boiler, heat exchanger
2).High temperature resistant transmission fluid pipe in power station
3).Ship with pressure pipe
4).The exhaust purification devices
5).Home appliance, electrical components,decorate pipe
6).Precision instrument manufacture
| Steel Grade | SS 309S |
| Thickness | 2-3 mm, 4-5 mm, >5 mm, 0-1 mm, 3-4 mm, 1-2 mm |
| C | 0.08 max |
| Mn | 2.00 max |
| P | 0.045 max |
| S | 0.03 max |
| Si | 0.75 max |
| Cr | 22.00-24.00 |
| Ni | 12.00-15.00 |
| Condition | UTS ksi (Mpa) | 0.2% YS ksi (Mpa) | Elongation % in 2 " (50.8mm) | Rockwell Hardness |
| Annealed | 95 (655) | 50 (345) | 45 | B85 |
*Your information is safe with us.
| Thickness | 4-5 mm, 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm |
| C | 0.11 |
| Mn | 1.03 |
| Si | 0.82 |
| P | 0.026 |
| S | 0.012 |
| Ni | 10.13 |
| Cr | 28.87 |
| TS N/mm2 | 813 |
| EL% | 28 |
| Steel Grade | SS 314 |
| Thickness | 0-1 mm, 3-4 mm |
| Surface Treatment | Coated, Painted, Hot Rolled |
| Tensile strength | 689 MPa |
| Yield strength | 345 MPa |
| Modulus of elasticity | 200 GPa |
| Elongation at break (in 50 mm) | 40% |
| Hardness, Rockwell B | 85 |
| Cr | 23-26 |
| Ni | 19-22 |
| Mn | 2 |
| Si | 1.5-3 |
| C | 0.25 |
| Si | 0.03 |
| P | 0.045 |
| Thickness | 2-3 mm, 0-1 mm, 1-2 mm, >5 mm, 3-4 mm, 4-5 mm |
| Steel Grade | SS 403 |
| C | 0.025 max |
| Mn | 1.00 max |
| Si | 0.60 |
| Cr | 17.50-19.50 |
| N | 01.00 max |
| Mo | 1.75-2.50 |
| P | 0.040 max |
| Su | 0.030 max |
| Tensile Strength ksi (min.) | Yield Strength 0.2% Offset ksi (min.) | Elongation - % in 50 mm (min.) | Hardness (Rockwell B) MAX |
| 70 | 30 | 25 | 98 |
*Your information is safe with us.
| Steel Grade | SS 405 |
| Thickness | 0-1 mm, 3-4 mm, 1-2 mm, 2-3 mm, 4-5 mm, >5 mm |
| Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 60 (415) | 25 (170) | 20 | 179 | 88 |
| C | 0.08 max |
| Cr | 11.5-14.5 |
| Mn | 1 max |
| Si | 1 max |
| S | 0.03 max |
| P | 0.04 max |
| Ni | 0.5 max |
| Al | 0.1-0.3 |
| Steel Grade | SS 409 |
| Standard | ASTM |
| Thickness | 4-5 mm, >5 mm, 0-1 mm, 3-4 mm, 1-2 mm, 2-3 mm |
| Tensile Strength MPa (min) | Yield Strength 0.2% MPa(min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 380 | 207 | 20 | 207 | 95 |
| C | 0.08 |
| Mn | 1.0 |
| Si | 1.0 |
| P | 0.045 |
| S | 0.045 |
| Cr | 10.5-11.75 |
| Ni | 0.5 |
| Ti | 0.48-0.75 |
| Thickness | 0-1 mm, 1-2 mm, >5 mm, 3-4 mm, 4-5 mm, 2-3 mm |
| Surface Treatment | Coated, Painted, Hot Rolled |
| C | 0.08/0.15 |
| Si | 1.00 |
| Mn | 1.5 |
| P | 0.04 |
| S | 0.03 |
| Cr | 11.5/13.5 |
| Ni | 0.75 |
| Proof Stress 0.2% (MPa) | Tensile Strength (MPa) | Elongation A5 (%) | Hardness (Max) | |
| HB | HRB | |||
| 205 | 450 | 20 | 217 | 96 |
*Your information is safe with us.
| Steel Grade | SS 430 |
| Thickness | 0-1 mm, 1-2 mm, >5 mm, 3-4 mm, 4-5 mm, 2-3 mm |
| C | 0.12 |
| Mn | 1.00 |
| Si | 1.00 |
| P | 0.04 |
| S | 0.03 |
| Cr | 16-18 |
| Ni | 0.75 |
| Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | |||
| 450 | 205 | 22 | 89 | 183 |
| Thickness | 1-2 mm, >5 mm, 3-4 mm, 4-5 mm, 2-3 mm, 0-1 mm |
| C | 0.12 |
| Si | 1.00 |
| Mn | 1.00 |
| P | 0.04 |
| S | 0.03 |
| Ni | 0.75 |
| Cr | 16.00-18.00 |
| Mo | 0.75-1.12 |
| Surface Treatment | Coated, Painted, Hot Rolled |
| Thickness | 3-4 mm, 0-1 mm, 2-3 mm, >5 mm, 4-5 mm, 1-2 mm |
| Steel Grade | SS 444 |
| C | 0.025 max |
| Mn | 1.00 max |
| Si | 0.60 |
| Cr | 17.50-19.50 |
| N | 01.00 max |
| Mo | 1.75-2.50 |
| P | 0.040 max |
| Su | 0.030 max |
Application
Food processing
Brewery and making equipment
Hot-water tanks
Heat-exchanger tubing
Automotive components
*Your information is safe with us.
| Steel Grade | SS 301LN |
| Thickness | 1-2 mm, >5 mm, 0-1 mm, 4-5 mm, 2-3 mm, 3-4 mm |
| Surface Treatment | Coated, Painted, Hot Rolled |
Properties
SS 301 (UNS S30100) is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications.
Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications.
SS 301LN Chemical Composition| C | 0.03 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Si | 1.0 |
| Cr | 16.0-18.0 |
| Ni | 6.0-8.0 |
| N | 0.20 |
| Yield | Tensile | Elongation | Hardness, max | |
| Min Mpa | Mpa | Min % | Brinell | Rockwell B |
| 240 | 550 | 45% | 241 | 100 |
| Steel Grade | SS 302 |
| Thickness | 2-3 mm, 3-4 mm, >5 mm, 0-1 mm, 4-5 mm, 1-2 mm |
| Surface Treatment | Coated, Painted, Hot Rolled |
| C | 0.15 |
| Si | 0.75 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.03 |
| Cr | 17.0/19.0 |
| Mo | - |
| Ni | 8.00/10.0 |
| Other | - |
Type 302 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. Type 302 is not hardenable by heat treatment and in non-magnetic in the annealed condition. It becomes increasingly magnetic with cold working. If carbide precipitation is an issue 304 may be a better choice with its lower carbon content.
302 Application