Aesteiron Steels LLP
Girgaon, Mumbai, Maharashtra
GST No. 27ABLFA3930D1ZO
Call 08048077407 74% Response Rate
Send E-mail
- Home
- »
- Our Product Range
- »
- Flanges & Fittings
| Size | 10-20 inch, 5-10 inch, 0-1 inch, 20-30 inch, >30 inch, 1-5 inch |
| Material Standard | ANSI B16.5, ASTM A182, ASTM A105 |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| I Deal In | New Only |
| Is It Iso Certified | Yes |
| Condition | New |
| Usage/Application | Oil Industry, Gas Industry etc |
| Size | 0-1 inch, 10-20 inch, >30 inch, 1-5 inch, 5-10 inch, 20-30 inch |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| I Deal In | New Only |
| Certification | ISO |
| Thickness | As Per Requirement |
| Material | Stainless Steel |
| Size | 20-30 inch, >30 inch, 1-5 inch, 5-10 inch, 10-20 inch, 0-1 inch |
| Material Standard | ASTM A105 |
| Color | Silver |
| Condition | New |
| Shape | Curve |
*Your information is safe with us.
| Size | As Per Requirement |
| Material | Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel |
| Type | Blind flanges, Threaded flanges, Weld neck flanges |
| Condition | New |
| Iso Certified | Yes |
| Product Customization | Available |
Blind flanges It is a round plates with no center hold used to close the ends of pipes, valves, or equipment. They assist in allowing easy access to a line once it has been sealed. They can also be used for flow pressure testing. Blind flanges are made to fit standard pipes in all sizes at higher pressure ratings than other flange types.
Lap Joint Flanges It is used on piping fitted with lapped pipe or with lap joint stub ends. It can rotate around the pipe to allow for an easy alignment & assembly of bolt holes even after the welds have been completed. And because of this lap joint flanges are used in systems requiring frequent disassembly of the flange & pipe. It is similar to slip on flange but have a curved radius at the bore & face to accomodate a lap joint stub end.Blind flanges are round plates with no center hold used to close the ends of pipes, valves, or equipment. They assist in allowing easy access to a line once it has been sealed. They can also be used for flow pressure testing. Blind flanges are made to fit standard pipes in all sizes at higher pressure ratings than other flange types.
Threaded Flange is a special types of pipe fittings that can be attached to pipewithout weldding. It can be threaded on a pipe & create a seal between the flang & pipe.| Size | 20-30 inch, 5-10 inch, 1-5 inch, >30 inch, 10-20 inch, 0-1 inch |
| Material Standard | ASTM A182, ASTM A105, ANSI B16.5 |
| Condition | New |
| Grade | SS 304, 304L, 304LN, 309, 309S, 310, 316, 316H, 316L, 321, 321H, 347, 347H, 348, 348H |
| Material | Stainless Steel |
| Design | Customized |
| Material | Stainless Steel, alloy steel, carbon steel |
| Size | As Per Requirement |
| Product Type | Structural |
| Condition | New |
*Your information is safe with us.
| Minimum Order Quantity | 500 Kg |
| Wire Type | Building Wire, Electric Wire, Drawn Wire |
| Material | Stainless Steel,Copper,Aluminium,Nickel |
| Size | As Per Required |
| Is It Armoured | Armoured |
| Condition | New |
| Size | As Per Requirement |
| Surface Finish | Polished |
| Thickness | As Per Requirement |
| Material | Stainless Steel |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| Is It Customized | Customized |
| Is It ISO Certified | Yes |
| Single Piece Length | As Per Requirement |
| Application | Chemical Fertilizer Pipe |
| I Deal In | New Only |
| Size | As Per Requirement |
| Application | Structure Pipe, Chemical Fertilizer Pipe, Hydraulic Pipe, Gas Pipe |
| Length | As Per Requirement |
| Packaging Type | Shrink Wrapping,Jute Wrapping,Bubble Wrapping,Wooden Boxes or As Per Requirement |
| Condition | New |
| Certification | ISO |
*Your information is safe with us.
| Condition | New |
| Country Of Origin | India |
| Corrosion Resistance | Yes |
| Material | Carbon Steel, Stainless Steel, Duplex Steel, Aluminium, Alloy Steel |
| Size | As Per Requirement |
| Usage/Application | Industrial |
| Size | or As Per Requirement, 0-1 inch, 1-5 inch, 5-10 inch |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| I Deal In | New Only |
| Thickness | As Per Requirement |
| Is It Customized | Customized |
| Carbon | 0.08 max |
| Chromium | 18 - 20 |
| Iron | Balance |
| Manganese | 2 max |
| Molybdenum | 3-4 |
| Nickel | 14-15 |
| Phosphorus | 0.045 max |
| Silicon | 1 max |
| Sulphur | 0.03 max |
| Usage/Application | Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe |
| Size | 3/4 inch, 1 inch, 1/4 inch, Or As Per Requirement |
| Application | Chemical Fertilizer Pipe, Hydraulic Pipe, Structure Pipe, Gas Pipe |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| Condition | New |
| Certification | ISO |
*Your information is safe with us.
| Type | Flanges |
| Material Standard | ASTM A182 |
| Product Type | Flanges |
| Condition | New |
| Material | Stainless Steel |
| Size | As Per Requirement |
| Condition | New |
| Corrosion Resistance | Yes |
| Is It Customized | Customized |
| Is It Anodised | Anodised |
| Is It En Certified | Certified |
| Is It ISO Certified | ISO Certified |
| Size | As Per Requirement |
| Material | Stainless Steel |
| Condition | New |
| Form | Unequal Tee, Equal Tee, Reducing Tee |
| Application | Chemical Fertilizer Pipe |
| Is It Rust Proof | Rust Proof |
Stainless Steel Forged Tee Grades: Stainless Steel 304 Forged Tee, Stainless Steel 304H Forged Tee, Stainless Steel 304L Forged Tee, Stainless Steel 304N Forged Tee, Stainless Steel 304LN Forged Tee, Stainless Steel 304Cb Forged Tee, Stainless Steel 309S Forged Tee, Stainless Steel 310Cb Forged Tee, Stainless Steel 316 Forged Tee, Stainless Steel 316H Forged Tee, Stainless Steel 316L Forged Tee, Stainless Steel 316N Forged Tee, Stainless Steel 316LN Forged Tee, Stainless Steel 317 Forged Tee, Stainless Steel 317L Forged Tee, Stainless Steel 321 Forged Tee, Stainless Steel 321H Forged Tee, Stainless Steel 347 Forged Tee, Stainless Steel 347H Forged Tee, Stainless Steel 348 Forged Tee, Stainless Steel 348H Forged Tee.
*Your information is safe with us.
| Size | As Per Requirement |
| Material | Stainless Steel |
| Grade | SS 304, 304L, 304LN, 309, 309S, 310, 316, 316H, 316L, 321, 321H, 347, 347H, 348, 348H |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| I Deal In | New Only |
| Condition | New |
| Quantity Per Pack | As Per Requirement |
| Product Type | Fasteners |
| Type | Flange |
| Size | As Per Requirement |
| Condition | New |
| Material Grade | SS 304, 304L, 304LN, 309, 309S, 310, 316, 316H, 316L, 321, 321H, 347, 347H, 348, 348H |
| Product Type | Flange |
| Material | Stainless Steel |
| Wire Material | SS |
| Quantity Per Roll | >20 kg |
| Thickness | As Per Requirement |
| Size | As Per Requirement |
| Type | Wire |
| Condition | New |
*Your information is safe with us.
| Application | It is used to connect hoses, pipes & tubes in hydraulic systems. |
| Is It Rust Proof | Rust Proof |
| Quantity Per Pack | As Per Requirement |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| Is It ISO Certified | ISO Certified |
| Size | As Per Requirement |
| Single Piece Length | As Per Requirement |
| Product Type | Fittings |
| Condition | New |
| Size | As Per Requirement |
| Elbow Bend Angle | 45 Degree, 90 Degree |
| Packaging Size | As Per Requirement |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement |
| Condition | New |
| Packing Type | Wooden Boxes, Jute or Polythene Wrapping |
| Size | As Per Requirement |
| Application | Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe |
| Thickness | As Per Requirement |
| Certification | ISO |
| Packaging Size | As Per Requirement |
| I Deal In | New Only |
*Your information is safe with us.
| Application | Chemical Fertilizer Pipe |
| Size | 1/4,3/4,1,2,3inches or as per requirement |
| Certification | Available |
| Condition | New |
| Elbow Type | 45 Deg, 90 Deg, 180 Deg |
| Product Type | Fittings |
| Application | Pharmaceutical / Chemical Industry |
| Material | Stainless Steel |
| Material Grade | SS 304, 304L, 304LN, 309, 309S, 310, 316, 316H, 316L, 321, 321H, 347, 347H, 348, 348H |
| Product Type | Fittings |
| Sizes | As Per Requirement |
| Condition | New |
| Material | Stainless Steel |
| Size | 1-5 inch, 10-20 inch, 5-10 inch, Or as per requirement, >30 inch, 0-1 inch, 20-30 inch |
| Condition | New |
| Type | Blind, Blind Flange |
| Grade | SS 304,304L,304LN,309,309S,310,316,316H,316L,321,321H,347,347H,348,348H |
| Types | Fittings |
304 Stainless Steel Blind Flange, 304H Stainless Steel Blind Flange, 304L Stainless Steel Blind Flange, 304N Stainless Steel Blind Flange, 304LN Stainless Steel Blind Flange, 304Cb Stainless Steel Blind Flange, 309S Stainless Steel Blind Flange, 310Cb Stainless Steel Blind Flange, 310S Stainless Steel Blind Flange, 316 Stainless Steel Blind Flange, 316H Stainless Steel Blind Flange, 316L Stainless Steel Blind Flange, 316N Stainless Steel Blind Flange, 316LN Stainless Steel Blind Flange, 317 Stainless Steel Blind Flange, 317L Stainless Steel Blind Flange, 321 Stainless Steel Blind Flange, 321H Stainless Steel Blind Flange, 347 Stainless Steel Blind Flange, 347H Stainless Steel Blind Flange, 348 Stainless Steel Blind Flange, 348H Stainless Steel Blind Flange
*Your information is safe with us.
| Size | As Per Requirement |
| Rust Resistant | Yes |
| Material | Stainless Steel |
| Is It Rust Proof | Rust Proof |
| Is It Water Proof | Water Proof |
| Condition | New |
| Material | Stainless Steel |
| Grade | SS 304,304L,304LN,309,309S,310,316,316H,316L,321,321H,347,347H,348,348H |
| Condition | Polished |
| Size | As Per Requirement |
| Product Type | Wire |
| Is It Customized | Customized |
| Type | EN | WNR | C | Si | Mn | P | S | N | Cr | Mo | Ni | Others |
| 302HQ | X3CrNiCu18-9-4 | 1.4567 | 0.04 | 1.0 | 2.0 | 0.045 | 0.03 | 0.11 | 17.00/19.00 | - | 8.50/10.50 | Cu 3-4 |
| 304Cu | X3CrNiCu18-9-4 | 1.4567 | 0.04 | 1.0 | 2.0 | 0.045 | 0.03 | 0.11 | 17.00/19.00 | - | 8.50/10.50 | Cu 3-4 |
| 304L | X2CrNi18-9 | 1.4307 | 0.030 | 1.0 | 2.0 | 0.045 | 0.015 | 0.11 | 17.50/19.50 | - | 8.00/10.50 | - |
| 304J3S | - | - | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | - | 17.00/19.00 | - | 8.50/10.50 | Cu 1-3 |
| XM-7 | - | - | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 17.00/19.00 | - | 8.50/10.50 | Cu 3-4 | |
| 305J1 | - | - | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 11.0-13.5 | 16.50/19.00 | - | 11.00/13.50 | Al 0.75-1.50 |
| 310 | X8CrNi25-21 | 1.4845 | 0.1 | 1.5 | 2.0 | 0.045 | 0.015 | 0.11 | 24.00/26.00 | - | 19.00/22.00 | |
| 316 | X5CrNiMo17-12-2 | 1.4401 | 0.07 | 1.0 | 2.0 | 0.045 | 0.015 | 0.11 | 16.50/18.50 | 2.00/2.50 | 10.00/13.00 | - |
| 316L | X2CrNiMo17-12-2 | 1.4404 | 0.030 | 1.0 | 2.0 | 0.045 | 0.015 | 0.11 | 16.50/18.50 | 2.00/2.50 | 10.00/13.00 | - |
| 316LCu | - | - | 0.03 | 0.65 | 1.0 | 0.03 | 0.03 | 18.00-20.00 | 2.00-3.00 | 11.00-14.00 | - | |
| 316Ti | - | - | 0.08 | 0.75 | 2.0 | 0.45 | 0.03 | 0.1 | 16.00-18.00 | 2.00-3.00 | 10.00-14.00 | Ti 5x% (C+N) |
| 321 | X6CrNiTi18-10 | 1.4541 | 0.08 | 1.00 | 2.00 | 0.045 | 0.015 | - | 17.0/19.0 | - | 9.0/12.0 | Ti: 5C/0.70 |
| 410 | X12Cr13 | 1.4006 | 0.08/0.15 | 1.00 | 1.50 | 0.040 | 0.015 | - | 11.5/13.5 | - | 0.75 | - |
| 430 | X6Cr17 | 1.4016 | 0.08 | 1.00 | 1.00 | 0.040 | 0.015 | - | 16.0/18.0 | - | - | - |
| Material Standard | ANSI B16.5 |
| Type | Threaded flanges, Blind flanges, Weld neck flanges |
| Condition | New |
| Size | As Per Requirement |
| Origin | India |
| Product Type | Flanges |
*Your information is safe with us.
| Size | As Per Requirement |
| Material | Copper |
| Grade | C70600, C71500, C71640, C10100, C10200, C10800, C12000, C12200 |
| Packaging Type | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes or As Per Requirement, Wooden Boxes or Jute Bags |
| Product Type | Fittings |
| Is It Customized | Customized |
| Condition | New |
| I Deal In | New Only |
| Size | As Per Requirement |
| Product Type | Fittings |
| Material | Stainless Steel |
| Grade | SS 304, 304L, 304LN, 309, 309S, 310, 316, 316H, 316L, 321, 321H, 347, 347H, 348, 348H |
| Condition | New |
| Usage/Application | Chemical Fertilizer Pipe |
| Size | 1 inch, Or As Per Requirement, 3/4 inch, 1/2 inch |
| Packaging Size | As Per Requirement |
| Product Type | Fittings |
| Condition | New |
*Your information is safe with us.
| Type | Fitting Tee |
| Condition | New |
| Size | As Per Requirement |
| Material | Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel |
| Product Type | Fittings |
| Gauge | 20, 14, 12, 19, 18 |
| Wire Material | Stainless Steel, Galvanized Iron, PVC Coated, Mild Steel, Nylon Coated |
| Quantity Per Pack | 0-10 kg, 20-30 kg, 40-50 kg, 30-40 kg, >50 kg, 10-20 kg |
| Length | As Per Requirement |
| Condition | New |
| Condition | New |
| Product Type | Fittings |
| Sizes | As Per Requirement |
| Packing Type | Wooden Boxes, Jute or Polythene Wrapping |
*Your information is safe with us.
| Ni | 19 – 22 |
| Cr | 24 – 26 |
| C | 0.25 max |
| Fe | Balance |
| Mn | 2 max |
| Si | 1.50 max |
| S | 0.03 max |
| P | 0.045 max |
| Density | 8.0 g/cm3 |
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
| Carbon | 0.08max |
| Manganese | 2.00max |
| Phosphorus | 0.045 max |
| Sulfur | 0.030 max. |
| Silicon | 0.75 max |
| Chromium | 16.00 - 18.00 |
| Nickel | 10.00 - 14.00 |
| Molybdenum | 2.00 - 3.00 |
| Nitrogen | 0.10 max. |
| Iron | Bal |
| UTS ksi (Mpa) | 0.2% Yield Strength ksi (Mpa) | Elongation |
| 84 (579) | 42(290) | 50% |
| Ni | Cr | Mo | Mn | Si | C | N | S | P | Fe |
| 11.0 - 15.0 | 18.0 - 20.0 | 3.0 - 4.0 | 2.0 Max | .75 Max | 0.03 Max | 0.1 Max | 0.03 Max | 0.045 Max | Balance |
| Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | Elongation Percent | Hardness Max. |
| 75 | 30 | 35 | 217 Brinell |
*Your information is safe with us.
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 316L | Min | - | - | - | - | - | 16 | 2 | 10 | - |
| Max | 0.03 | 2 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | 0.1 |
| Tensile Str (MPa) min | Yield Str 0.2% Proof (MPa) min | Elong (% in 50mm) min |
| 485 | 170 | 40 |
| Ni | 19 – 22 |
| Cr | 24 – 26 |
| C | 0.25 max |
| Fe | Balance |
| Mn | 2 max |
| Si | 1.50 max |
| S | 0.03 max |
| P | 0.045 max |
| Density | 8.0 g/cm3 |
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35% |
*Your information is safe with us.
| Surface Finishing | Polished |
| Material | SS |
3.7/5
Rated by 19 Users